Slide Kontrol Drift series referenceSpecial order · Estimated lead time: typically 2-3 weeks
09-20 Nissan 370z - Slide Kontrol Drift Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 14 kg/mm front and 8.7 kg/mm rear
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CIN020-SK
Product details
Listed for the 2009 to 2018 Nissan 370z, the Slide Kontrol Drift coilovers use 14 kg/mm front springs and 8.7 kg/mm rear springs, with damping roughly 30 to 50 percent stiffer than Kontrol Pro. The firmer springs assist initiation while drifting, and the rear is a true rear coilover.
Shock bodies are 55 mm inverted units, which add oil capacity and cooling and perform better under sustained stress at track events. Strengthened steel lower mounts handle the loads of competitive drifting, and the pillowball top mounts include camber adjustability, helpful for alignment and for avoiding a separate camber kit. Helper springs are included on some applications. You receive four assembled coilovers, damping knobs and spanner wrenches. Begin 18 clicks counterclockwise from full stiff and get a professional alignment. The compatibility list is long: it includes the 2019 and 2020 370z (Z34, roadster excluded) and several Infiniti models, so check your car in the fitment checker.
Supported features
36 levels of damping adjustment. Set damping to full soft for a comfortable cruising setting for normal driving.
Configured with roughly 30–50% stiffer shock damping than Kontrol Pro; stiffer spring rates assist initiation while drifting. Helper springs are included on some applications.
Inverted-type shocks use 55 mm bodies for added oil capacity and cooling efficiency, and perform better under sustained stress at track events.
MacPherson-strut applications use strengthened steel lower mounts for the loads of competitive drifting.
Many MacPherson applications have pillowball upper mounts with camber adjustability — helpful for alignment and removing the need for a separate camber kit.
Oil and gas stay separated within the cylinder for faster heat dissipation, finer damping adjustment, and consistent ride quality.
Compatible applications (10)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN020-SK
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.
- 08-13 Infiniti G37 - Slide Kontrol Drift Coilovers
- 08-13 Infiniti G25 - Slide Kontrol Drift Coilovers
- 08-13 Infiniti Q60 - Slide Kontrol Drift Coilovers
- 14-15 Infiniti Q40 - Slide Kontrol Drift Coilovers
- 14-15 Infiniti Q60 - Slide Kontrol Drift Coilovers
- 07-08 Infiniti G35 - Slide Kontrol Drift Coilovers