Slide Kontrol Drift series referenceSpecial order · Estimated lead time: typically 2-3 weeks
14-15 Infiniti Q60 - Slide Kontrol Drift Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 14 kg/mm front and 8.7 kg/mm rear
One approved application: 2014–2015 Infiniti Q60 · Coupe RWD
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CIN020-SK
Product details
A 2011 or 2012 Infiniti Q60 uses the Slide Kontrol Drift kit, CIN020-SK, which delivers four units sprung and valved for drifting at 14 kg/mm front and 8.7 kg/mm rear. The dampers offer 36 levels of adjustment, and the lower mount is adjustable for ride height.
Compared with the Kontrol Pro, the damping on this kit runs roughly 30 to 50 percent stiffer, and the firmer springs assist initiation while drifting. Where an application needs it, helper springs come in the kit. The inverted-type shocks on the MacPherson fronts use 55 mm bodies that hold more oil and cool better when the car is pushed at track events. The 2007 to 2008 G35 and the 2014 to 2015 Q60 coupe are also listed. Confirm the fit with the year, make and model checker.
Supported features
36 levels of damping adjustment. Set damping to full soft for a comfortable cruising setting for normal driving.
Configured with roughly 30–50% stiffer shock damping than Kontrol Pro; stiffer spring rates assist initiation while drifting. Helper springs are included on some applications.
Inverted-type shocks use 55 mm bodies for added oil capacity and cooling efficiency, and perform better under sustained stress at track events.
MacPherson-strut applications use strengthened steel lower mounts for the loads of competitive drifting.
Many MacPherson applications have pillowball upper mounts with camber adjustability — helpful for alignment and removing the need for a separate camber kit.
Oil and gas stay separated within the cylinder for faster heat dissipation, finer damping adjustment, and consistent ride quality.
Compatible applications (10)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN020-SK
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.