Version DR Drag Race series referenceSpecial order · Estimated lead time: typically 2-3 weeks
06-12 Lexus GS350 - Version DR Drag Race Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 24.8 kg/mm front and 7.5 kg/mm rear
One approved application: 2006–2012 Lexus GS350 · RWD
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CLX110-DR
Product details
Set up for drag strip use, Version DR fits a 2006 to 2012 Lexus GS350 (rear-wheel drive). Each assembled coilover is sprung and valved for this application, using 24.8 kg/mm springs up front and 7.5 kg/mm at the rear, a split chosen to manage weight transfer.
The kit runs on the Version RR road-race system, with valving customized for drag racing. Each damper has 36 levels of adjustment, and the soft end works for the cruise between passes. The patented bearing in the pillowball upper mount on MacPherson applications helps reduce noise and sharpen steering response.
Set ride height on the adjustable lower mount, which keeps full shock travel as the car is lowered, and lock every collar with both spanner wrenches. Monotube construction keeps oil and gas apart for steady behavior from run to run. Use the year, make and model checker to verify fit. The GS450, IS350 and IS-F are also listed for this system.
Supported features
Custom valved for drag racing with spring rates chosen to maximize traction and regulate weight transfer.
36 levels of damping adjustment. Set full soft for a comfortable cruising setting between passes.
Many MacPherson applications have pillowball upper mounts; the patented bearing design combats noise and improves steering feel and response.
Most applications adjust ride height without affecting shock and spring travel.
Oil and gas stay separated within the cylinder for faster heat dissipation, finer damping adjustment, and consistent behavior pass after pass.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum; steel shock bodies are zinc-plated for added protection from corrosion.
Compatible applications (7)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CLX110-DR
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.