Kontrol Sport series referenceSpecial order · Estimated lead time: typically 2-3 weeks
06-12 Lexus GS350 - Kontrol Sport Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 12 kg/mm front and 9.8 kg/mm rear
One approved application: 2006–2012 Lexus GS350 · AWD
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CLX131-SP
Product details
Kontrol Sport coilovers for the 2006 to 2012 Lexus GS350 AWD come as four assembled units with 12 kg/mm front and 9.8 kg/mm rear springs. Each has 36 levels of damping adjustment and a monotube, high-pressure body, and the valving runs 30 percent stiffer than the Kontrol Pro.
Ride height is set at an adjustable lower mount that keeps full shock travel while the car is lowered, and a spring perch takes over where the layout has no lower mount. Mounts, collars and spring perches are machined from 6061-T6 billet aluminum, which keeps the weight down without giving up strength.
The same coilovers are also listed for the 2006 to 2012 GS300, GS430 and GS450, and the 2006 to 2013 IS250 and IS350 AWD. Use the year, make and model checker before ordering, and lock every collar with both spanner wrenches after setting the height.
Supported features
36 levels of damping adjustment let you dial the system in for handling and comfort. Adjustment alters compression and rebound together for effective, user-friendly setup changes.
Oil and gas stay separated within the cylinder. Compared with twin-tube construction, a monotube dissipates heat faster and more evenly, allows finer damping adjustment, and resists aeration and cavitation for consistent ride quality.
Many MacPherson-strut applications use pillowball top mounts front and rear, installing to OEM specifications. The patented mount adds adjustability, combats noise, and sharpens steering feel and response.
Most applications adjust ride height without losing suspension travel, so you reach the height you want without bottoming out the shock. Separate rear shock-and-spring applications adjust at the spring perch and lower mount.
KSport's advanced upper pillowball mount is available on many applications, giving separate camber and caster adjustment for alignment work and removing the need for a separate camber kit.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum for a lightweight, durable, corrosion-resistant build. Steel shock bodies are zinc-plated for added protection from corrosion.
Compatible applications (6)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CLX131-SP
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.