Slide Kontrol Drift series referenceSpecial order · Estimated lead time: typically 2-3 weeks
13-20 Subaru BRZ - Slide Kontrol Drift Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 12.2 kg/mm front and 10.5 kg/mm rear
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CSC080-SK
Product details
This is the Slide Kontrol Drift coilover set for the 2013 to 2020 Subaru BRZ, built for people who spend their weekends sideways. Springs are rated 12.2 kg/mm front and 10.5 kg/mm rear, and the damping is configured roughly 30–50% stiffer than Kontrol Pro, which the page says helps the car initiate a slide. Inverted 55 mm shock bodies carry extra oil for cooling, so the dampers keep their composure through sustained sessions at a track event.
Each damper has its own knob with 36 levels, and the page suggests starting 18 clicks counterclockwise from full stiff, then adjusting from there. Ride height is set at the adjustable lower mount, and every collar gets locked with both spanner wrenches. The box holds four assembled coilovers, pillowball upper mounts with camber adjustment, the knobs and the wrenches. The same part is also listed for several Toyota 86 and Scion FR-S years, so run your own car through the year/make/model checker before ordering, and plan on a professional alignment afterward.
Supported features
36 levels of damping adjustment. Set damping to full soft for a comfortable cruising setting for normal driving.
Configured with roughly 30–50% stiffer shock damping than Kontrol Pro; stiffer spring rates assist initiation while drifting. Helper springs are included on some applications.
Inverted-type shocks use 55 mm bodies for added oil capacity and cooling efficiency, and perform better under sustained stress at track events.
MacPherson-strut applications use strengthened steel lower mounts for the loads of competitive drifting.
Many MacPherson applications have pillowball upper mounts with camber adjustability — helpful for alignment and removing the need for a separate camber kit.
Oil and gas stay separated within the cylinder for faster heat dissipation, finer damping adjustment, and consistent ride quality.
Compatible applications (8)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CSC080-SK
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.