Kontrol Plus 2 Way series referenceSpecial order · Estimated lead time: typically 2-3 weeks
09-20 Nissan 370z - Kontrol Plus 2-Way Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 16 kg/mm front and 9.8 kg/mm rear
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CIN020-P2
Product details
The 2019 Nissan 370Z (Z34 chassis, roadster excluded) is the approved application for CIN020-P2, the Kontrol Plus 2-Way coilover. Four assembled coilovers come with 16 kg/mm springs at the front and 9.8 kg/mm at the rear, plus 36 levels of damping on one knob per damper.
The 2-way design uses 36 damping levels at the top of each unit and 24 nitrogen levels at the bottom of an external reservoir, all independently adjustable. Spring rates run 2 to 3 kg stiffer than the Kontrol Pro, and damping is 60 to 150 percent firmer. Pillowball upper mounts on MacPherson fronts add camber and caster adjustment. Lower-mount adjustment keeps ride height changes from costing shock travel. The 2008 to 2009 Q60 and the 2014 to 2015 Q60 coupe are also listed. Confirm the body style and the year with the checker before ordering.
Supported features
36 levels of damping adjustment at the top of the assembly, plus an additional 24 levels of nitrogen adjustment at the bottom of the reservoir.
Kontrol Plus 2-Way systems run 2–3 kg stiffer spring rates and 60–150% stiffer damping than the Kontrol Pro kit.
Standard external reservoirs allow rebound, compression, and nitrogen pressure to be adjusted independently — 864 possible settings.
Oil and gas stay separated within the cylinder for faster, more even heat dissipation, finer damping adjustment, and resistance to aeration and cavitation.
Standard on MacPherson-strut applications: camber and caster adjustable mounts that replace the stock rubber or plastic mounts to reduce flex and improve response.
Most applications adjust ride height without affecting shock and spring travel, so you can set your stance without bottoming out the shock.
Compatible applications (10)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN020-P2
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.