Kontrol Plus 2 Way series referenceSpecial order · Estimated lead time: typically 2-3 weeks
08-13 Infiniti Q60 - Kontrol Plus 2-Way Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 16 kg/mm front and 9.8 kg/mm rear
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CIN020-P2
Product details
For a 2008 or 2009 Infiniti Q60, the Kontrol Plus 2-Way is CIN020-P2. The springs are rated 16 kg/mm up front and 9.8 kg/mm at the rear, and the four units come sprung and valved for that application. A knob on each damper sets 36 levels of damping.
Each unit has an external reservoir, and nitrogen pressure is adjustable separately from rebound and compression, adding 24 more levels. The result is firmer damping than the Kontrol Pro, with stiffer spring rates. The adjustable lower mount keeps travel while the ride height changes. The kit is also listed for the 2019 Nissan 370Z, roadster excluded, and for the 2014 to 2015 Q60 coupe. Run the year, make and model checker before you order, and align the car when it is set.
Supported features
36 levels of damping adjustment at the top of the assembly, plus an additional 24 levels of nitrogen adjustment at the bottom of the reservoir.
Kontrol Plus 2-Way systems run 2–3 kg stiffer spring rates and 60–150% stiffer damping than the Kontrol Pro kit.
Standard external reservoirs allow rebound, compression, and nitrogen pressure to be adjusted independently — 864 possible settings.
Oil and gas stay separated within the cylinder for faster, more even heat dissipation, finer damping adjustment, and resistance to aeration and cavitation.
Standard on MacPherson-strut applications: camber and caster adjustable mounts that replace the stock rubber or plastic mounts to reduce flex and improve response.
Most applications adjust ride height without affecting shock and spring travel, so you can set your stance without bottoming out the shock.
Compatible applications (10)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN020-P2
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.