Version DR Drag Race series referenceSpecial order · Estimated lead time: typically 2-3 weeks
14-15 Infiniti Q60 - Version DR Drag Race Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 14 kg/mm front and 6.3 kg/mm rear
One approved application: 2014–2015 Infiniti Q60 · Coupe RWD
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CIN020-DR
Product details
The 2011 and 2012 Infiniti Q60 is the vehicle for CIN020-DR here, a Version DR drag race coilover. Spring rates of 14 kg/mm at the front and 6.3 kg/mm at the rear were picked with launch grip in mind, and the valving is custom for drag racing.
Aimed at lowering E.T. and 60-foot times, the package keeps the car composed between passes thanks to monotube bodies that shed heat evenly. Each damper's 36 levels are set on a knob, and the adjustable lower mount preserves travel while ride height drops. Pillowball upper mounts on MacPherson fronts quiet the bearings and sharpen steering. Mounts and collars use machined 6061-T6 aluminum, and the rear is a true coilover. Confirm your trim with the year, make and model checker before you buy. Because the rear is a true coilover, the whole setup is built around that rear unit rather than a strut conversion.
Supported features
Custom valved for drag racing with spring rates chosen to maximize traction and regulate weight transfer.
36 levels of damping adjustment. Set full soft for a comfortable cruising setting between passes.
Many MacPherson applications have pillowball upper mounts; the patented bearing design combats noise and improves steering feel and response.
Most applications adjust ride height without affecting shock and spring travel.
Oil and gas stay separated within the cylinder for faster heat dissipation, finer damping adjustment, and consistent behavior pass after pass.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum; steel shock bodies are zinc-plated for added protection from corrosion.
Compatible applications (10)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN020-DR
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.
- 08-13 Infiniti G37 - Version DR Drag Race Coilovers
- 08-13 Infiniti G25 - Version DR Drag Race Coilovers
- 08-13 Infiniti Q60 - Version DR Drag Race Coilovers
- 14-15 Infiniti Q40 - Version DR Drag Race Coilovers
- 09-20 Nissan 370z - Version DR Drag Race Coilovers
- 07-08 Infiniti G35 - Version DR Drag Race Coilovers