Drilled kit image for BKVO070-836COSpecial order · Estimated lead time: typically 2-4 weeks
04-12 Volvo V50 - Front 8 Piston Big Brake Kit w/ 13 in. Drilled Rotors - Supercomp
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Two 8-piston Supercomp calipers (front axle)
- Two 13 in two-piece cross-drilled rotors with aluminum center bells
- SC5 street brake pads
- Stainless-steel braided brake lines
- CNC-machined caliper mounting brackets and hardware
One approved application: 2004–2012 Volvo V50 · FWD
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKVO070-836CO
Product details
Billet 8-piston Supercomp calipers sit on two 13 in (330 mm) two-piece cross-drilled rotors in this kit for the 2004-2012 Volvo V50 FWD. Aluminum center bells mount inside each rotor, and the page names the V50 as the only application.
Cross-drilled rotors are the setting for a V50 used mostly on the road. The kit comes with SC5 street brake pads and stainless-steel braided lines, and CNC-machined brackets with hardware complete the package. The floating two-piece rotor is described as self-centering, lowering brake drag through more even application, and the one-piece caliper is machined from solid billet aluminum.
Check the year, make and model checker for this V50 before ordering, then record part number BKVO070-836CO for the front axle. For wheels, the page gives 17 in or larger as a planning rule, about 4 in over the rotor, and asks that the KSport template be tested against the barrel and spokes.
Supported features
One-piece construction from a solid billet of aerospace-quality aluminum rather than cast or welded, for even thickness and strength across the caliper block.
The outer section shifts slightly as needed for better self-centering in the caliper, lowering brake drag and boosting performance through more even application.
Calipers, floating brake discs, SC5 street pads, owner's manual, and all required hardware come standard.
CNC-machined carbon steel brackets let the larger calipers bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
DOT-compliant stainless braided lines stop expansion under pressure for quicker response and a firmer pedal than stock rubber lines.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Compatible applications (2)
Choices for this kit
This part number ships with cross-drilled rotors. Cross-drilled runs cooler and suits daily driving; the slotted version of this kit suits track use. Both versions are listed on the Supercomp page.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN BKVO070-836CO
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.