Circuit Pro 3 Way series referenceSpecial order · Estimated lead time: typically 2-3 weeks
15-18 Subaru WRX - Circuit Pro 3-Way Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 16 kg/mm front and 16 kg/mm rear
One approved application: 2015–2018 Subaru WRX · Incl. STI
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CSB140-C3
Product details
Circuit Pro 3-Way coilovers are built for the 2015-2018 Subaru WRX, including the STI. Four assembled units carry 16 kg/mm springs at both the front and the rear, and each has 36 levels of damping adjustment with one knob per damper.
The system is three-way independent, with rebound, compression and nitrogen pressure set separately through external reservoirs. That adds up to 11,664 possible combinations. Some vehicles receive front reservoirs only where rear space is limited. The reservoirs are a standard part of this system, not an option.
The shock stroke is 20-30 mm shorter than on street kits, and the advanced pillowball top mounts adjust camber and caster in place of the OEM mounts. The 2008-2014 Impreza WRX STI is also listed for this kit. Confirm your exact year and model with the KSport checker before ordering.
Supported features
36 levels of damping adjustment. Set damping to full soft for a comfortable cruising setting for normal driving.
Standard external reservoirs allow rebound, compression, and nitrogen pressure to be adjusted independently — 11,664 possible combinations. Some vehicles receive front reservoirs only where rear space is limited.
Aggressive spring rates and shock valving combined with a 20–30 mm shorter shock stroke. Choose proven spring rates or your own custom rates; the shocks are valved to what you select.
Standard on MacPherson-strut applications: camber and caster adjustable mounts that replace the stock rubber or plastic mounts to reduce flex.
Oil and gas stay separated within the cylinder for faster, more even heat dissipation, finer damping adjustment, and consistent ride quality.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum; steel shock bodies are zinc-plated for added protection from corrosion.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CSB140-C3
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.