Slotted rotor style referenceSpecial order · Estimated lead time: typically 2-4 weeks
89-93 Porsche 964 - Rear 4 Piston Big Brake Kit w/ 13 in. Slotted Rotors - Dualcomp
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Two 4-piston Dualcomp calipers (rear axle)
- Two 13 in two-piece slotted rotors with aluminum center bells
- street brake pads
- Stainless-steel braided brake lines
- CNC-machined caliper mounting brackets and hardware
- Hydraulic handbrake caliper circuit (see the series page)
One approved application: 1989–1993 Porsche 964 · C2 RWD
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKPO100-435SO
Product details
This rear Dualcomp kit is built for the 1989-1993 Porsche 964 C2 RWD, the single application named on the page. It runs four-piston billet calipers at the rear axle, with 13 in (330 mm) two-piece slotted rotors and aluminum center bells on each side.
The Dualcomp caliper is a dual-circuit design: two pistons serve the foot brake and two serve the handbrake, each on its own hydraulic system. The page notes the hydraulic handbrake caliper circuit and refers buyers to the series page for how it works.
The series text describes its two-piece rotors as commonly up to 50% lighter than OEM rotors of the same size, a series-wide claim best read as typical rather than exact. Street brake pads and stainless-steel braided brake lines are included. Check the year, make and model checker before buying, since this kit is listed for the 964 only. The page also gives 17 in or larger as the wheel planning rule, about 4 in over the rotor.
Supported features
Two pistons serve the foot brake and two serve the handbrake, each running independently on its own system.
Extremely lightweight two-piece rotors — commonly up to 50% lighter than OEM rotors of the same size.
A polished titanium handbrake cylinder and lever for feel, appearance, and control.
CNC-machined carbon steel brackets let the larger caliper bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Compatible applications (2)
Choices for this kit
This part number ships with slotted rotors. Slotted suits track use; the cross-drilled version of this kit suits daily driving. Both versions are listed on the Dualcomp page.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN BKPO100-435SO
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.