Gravel Rally Spec GR series referenceSpecial order · Estimated lead time: typically 2-3 weeks
90-95 Nissan Pulsar - Gravel Rally Spec GR Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 6 kg/mm front and 5 kg/mm rear
One approved application: 1990–1995 Nissan Pulsar · N14
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CNS191-GR
Product details
Gravel Rally Spec GR coilovers suit the 1990 to 1995 Nissan Pulsar on the N14 chassis, with springs rated 6 kg/mm at the front and 5 kg/mm at the rear. The NX1600 of the same years is also listed, so confirm your car with the year, make and model checker before ordering.
The rough-road build lengthens the stroke and uses 250 mm to 270 mm springs for better control over uneven, bumpy surfaces. On MacPherson-strut applications the top mounts are hardened-rubber pillowballs, built to absorb repeated impacts from loose surfaces.
Height range varies per vehicle and does not exceed the original ride height, so set the height at the adjustable lower mount where one exists. The 36 levels of adjustment work on compression and rebound together. Lock each collar with both spanner wrenches, begin at 18 clicks counterclockwise from full stiff, and have a professional complete setup and alignment afterward.
Supported features
Gravel Rally springs range from 250 mm to 270 mm with extended cylinder length and piston stroke, greatly improving handling over uneven and bumpy roads. Height range varies per vehicle and does not exceed OE ride height.
Asphalt Rally uses inverted shocks on many MacPherson applications, moving the gas/oil chamber away from the knuckle and brakes to reduce heat transfer and unsprung weight.
Strengthened steel lower mounts are standard on MacPherson applications; Gravel Rally adds heavy-duty steel upper mounts on most applications. Wishbone and multi-link applications use the standard aluminum mounts.
Gravel Rally kits use unique hardened-rubber pillowball top mounts on MacPherson applications to absorb repeated impacts from loose surfaces.
Simultaneous compression and rebound adjustment across 36 levels, with carefully selected per-application spring rates and damping to stabilize the car over uneven roads.
Inverted applications use 55 mm bodies for added oil capacity and cooling under sustained stage loads.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CNS191-GR
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.