Slotted rotor style referenceSpecial order · Estimated lead time: typically 2-4 weeks
97-01 Mitsubishi Mirage - Front 3 Piston Big Brake Kit w/ 13 in. Slotted Rotors - Slimline
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Two 3-piston Slimline calipers (front axle)
- Two 13 in two-piece slotted rotors with aluminum center bells
- SC5 street brake pads
- Stainless-steel braided brake lines
- CNC-machined caliper mounting brackets and hardware
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKMT090-332SO
Product details
The slotted Slimline kit for the 1997-2001 Mitsubishi Mirage pairs 3-piston one-piece billet aluminum calipers with 13 in (330 mm) two-piece slotted rotors. Each rotor carries an aluminum center bell, and the box includes SC5 street brake pads, stainless braided brake lines and CNC-machined caliper mounting brackets with hardware.
Keep the parking brake in mind here: the OEM handbrake will not function with this kit. Slotted rotors are the choice for track-focused owners, and the cross-drilled sibling suits daily use. Plan the parking brake arrangement before first use.
A 17 in or larger wheel is the planning figure for this rotor size, so measure your rims carefully against it. The Lancer on chassis CJ4A is also named for this kit, so run the year, make and model checker first before buying.
Supported features
A single-side piston caliper that keeps the styling of the multi-piston calipers while fitting behind wheels with limited clearance.
Extremely lightweight two-piece rotors — commonly up to 50% lighter than OEM rotors of the same size.
Calipers, floating brake discs, SC5 street pads, owner's manual, and all required hardware come standard.
CNC-machined carbon steel brackets let the calipers bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Compatible applications (2)
Choices for this kit
This part number ships with slotted rotors. Slotted suits track use; the cross-drilled version of this kit suits daily driving. Both versions are listed on the Slimline page.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN BKMT090-332SO
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.