Gravel Rally Spec GR series referenceSpecial order · Estimated lead time: typically 2-3 weeks
98-03 Mitsubishi Galant - Gravel Rally Spec GR Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 6 kg/mm front and 5 kg/mm rear
One approved application: 1998–2003 Mitsubishi Galant · USA McPherson
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CMT070-GR
Product details
If your 1998 to 2003 Mitsubishi Galant sees broken pavement, the Gravel Rally Spec GR coilovers are built for that: the springs run 250–270 mm long with extended cylinder length and piston stroke, and the page says height range varies per vehicle and does not exceed OE ride height. Rates are 6 kg/mm front and 5 kg/mm rear. The approved application is the Galant with USA McPherson front suspension.
Gravel kits add heavy-duty steel upper mounts on most applications and hardened-rubber pillowball top mounts on MacPherson cars, which absorb repeated impacts from loose surfaces. Damping spans 36 levels, with the lower mount handling ride height. A box holds four assembled coilovers, knobs and spanner wrenches. The 2000 to 2005 Eclipse (USA McPherson) is also listed. Confirm suspension type and year with the fitment checker.
Supported features
Gravel Rally springs range from 250 mm to 270 mm with extended cylinder length and piston stroke, greatly improving handling over uneven and bumpy roads. Height range varies per vehicle and does not exceed OE ride height.
Asphalt Rally uses inverted shocks on many MacPherson applications, moving the gas/oil chamber away from the knuckle and brakes to reduce heat transfer and unsprung weight.
Strengthened steel lower mounts are standard on MacPherson applications; Gravel Rally adds heavy-duty steel upper mounts on most applications. Wishbone and multi-link applications use the standard aluminum mounts.
Gravel Rally kits use unique hardened-rubber pillowball top mounts on MacPherson applications to absorb repeated impacts from loose surfaces.
Simultaneous compression and rebound adjustment across 36 levels, with carefully selected per-application spring rates and damping to stabilize the car over uneven roads.
Inverted applications use 55 mm bodies for added oil capacity and cooling under sustained stage loads.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CMT070-GR
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.