Air Suspension category referenceSpecial order · Estimated lead time: typically 2-4 weeks
88-92 Mazda MX-6 - Airtech Pro Plus Air Suspension
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four application-specific air struts with 36-way damping and adjustable lower mounts
- Viair 444C compressor and air tank
- Digital manifold with full-colour OLED remote — four-corner independent control, no switches or gauges to wire
- All hoses, wiring and installation manuals
- Damping adjustment knob
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — CFD040-APP
Product details
Airtech Pro Plus is set up for the 1988-1992 Mazda MX-6 under part CFD040-APP. Switches and gauges give way to a digital manifold and an OLED color remote, which controls each of the four corners independently. Four application-specific struts with 36-way damping and adjustable lower mounts arrive with the 444C compressor and air tank.
There is no complex wiring to route, and the remote screen shows tank pressure and each bag's pressure at once. Height is held by pressure-based leveling that needs no attention. The single 444C can take the car from lowest to maximum height in as little as four seconds.
Each strut has 36 damping levels, adjusted with the included knob. The MX-6 is also listed with the Ford Probe from 1989 to 1992, so confirm your exact model against the year/make/model checker. Check every fitting for leaks at 70 psi with soapy water after the first 500 miles or one month.
Supported features
No switches or gauges and no complex wiring. The kit is operated from a single OLED color-screen remote that displays tank and bag pressure at all four corners.
36 levels of damping adjustment on every strut using the included damping knob.
Sleeve-type and double-bellow bags engineered to match the vehicle and its OEM suspension design.
Fine-tune ride height at any pressure through the adjustable lower mount.
The single 444C can raise the car from lowest to maximum height in as little as four seconds.
Available on certain MacPherson-strut applications.
Compatible applications (2)
Choices for this system
Basic (paddle valves and gauge), Deluxe (electronic switches and remote), Pro Plus (OLED remote, four-corner control) and Executive (adds height sensors and auto-leveling) are separate part numbers for this vehicle; compare them on the Air Suspension page.
Available on certain MacPherson-strut applications; ask a technician whether they apply to this vehicle.
Installation
Bolt-on struts with supplied hoses, wiring and manuals; professional installation is recommended. Recheck the system after the first 500 miles or one month; to check for leaks, inflate to 70 psi and spray each fitting with soapy water.
Air suspension setup and careWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim.
Warranty terms and service requestsOther published pages for MPN CFD040-APP
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.