Air Suspension category referenceSpecial order · Estimated lead time: typically 2-4 weeks
10-13 Mazda 3 - Airtech Executive Air Suspension
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four 36-way air struts, four vehicle-matched air bags and four ride-height sensors
- 5-gallon lightweight air tank with two 1/4 in and two 3/8 in ports, mounted on a black carpeted board
- One VIAIR 444C compressor, 165–200 psi pressure switch and two 30 A relays
- Four-corner electronic control unit, full-color OLED remote, vehicle charger and separate backup remote
- 25 m of 1/4 in air line, 1 m of 10 mm air line, power wire and the listed tank/control fittings
- Application-specific tool kit with spanner wrenches, damping knobs and brake-line brackets, plus the owner’s manual
One approved application: 2010–2013 Mazda 3 · Includes Mazdaspeed 3
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — CMZ250-AEX
Product details
The Airtech Executive fits the 2010 to 2013 Mazda 3, and the Mazdaspeed 3 is covered as well. Four 36-way struts pair with four vehicle-matched air bags and four ride-height sensors, so the car can level itself. Run the checker by year, make and model to confirm fitment before ordering.
The four-corner electronic control unit takes its commands from a full-color OLED remote that reads tank and bag pressure at each corner. A standard 4-button backup remote and the vehicle charger come in the box, and the compressor is a single VIAIR 444C.
Power wire, 25 m of 1/4 in air line and 1 m of 10 mm line arrive with the kit, along with the tank and control fittings. Plan the install with the tool kit's spanner wrenches and brake-line brackets, and remember that raise time varies with the vehicle and the installation.
Supported features
The OLED color-screen remote displays tank and bag pressure at all four corners and charges from the included vehicle charger. A standard 4-button backup remote is included.
36 levels of damping adjustment on every strut using the included damping knob.
Sleeve-type and double-bellow bags engineered to match the vehicle and its OEM suspension design.
Fine-tune ride height at any pressure through the adjustable lower mount.
One VIAIR 444C compressor, a 165–200 psi pressure switch and two 30 A relays are included. Raise time depends on the vehicle, plumbing, pressure and installation.
Available on certain MacPherson-strut applications.
Compatible applications (3)
Choices for this system
Basic (paddle valves and gauge), Deluxe (electronic switches and remote), Pro Plus (OLED remote, four-corner control) and Executive (adds height sensors and auto-leveling) are separate part numbers for this vehicle; compare them on the Air Suspension page.
Available on certain MacPherson-strut applications; ask a technician whether they apply to this vehicle.
The kit includes an OLED color-screen remote plus a standard 4-button backup remote.
Installation
Bolt-on struts with supplied hoses, wiring and manuals; professional installation is recommended. Recheck the system after the first 500 miles or one month; to check for leaks, inflate to 70 psi and spray each fitting with soapy water.
Air suspension setup and careWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim.
Warranty terms and service requestsOther published pages for MPN CMZ250-AEX
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.