Drilled kit image for BKKI070-653COSpecial order · Estimated lead time: typically 2-4 weeks
11-14 Kia Optima - Rear 6 Piston Big Brake Kit w/ 15 in. Drilled Rotors - Procomp
Fits
- Kia Optima 2011–2014 · Turbo and Non-Turbo
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Supercomp calipers for this application
- Two-piece cross-drilled or slotted rotors
- SC5 street brake pads
- Stainless-steel braided brake lines
- Caliper mounting brackets and hardware
Approved application: 2011–2014 Kia Optima · Turbo and Non-Turbo
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKKI070-653CO
Product details
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications). Our extreme lightweight one-piece caliper comes in differential bore configuration. It is CNC machined from aircraft quality billet, weighs just over 5lbs. each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless-steel brake pad wear plates are also standard on each caliper design. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design. The stainless-steel brake lines stop expansion under pressure. Ksport utilize a 2-piece disc assembly, which reduces weight both rotating and unsprung. Many applications have a floating disc option which stops thermal stresses of extreme heat from warping the disc or cupping the braking surface. Our unique slot design on the rotor greatly reduces braking noise and expels gas and pad debris faster than conventional slot designs. Every rotor is always heat treated and balanced before shipment for the best possible performance. Cross drilled rotors tend to run cooler than slotted and are recommended for daily driven vehicles. Slotted rotors are recommended for vehicles that will be seeing more track use than daily driving.
Supported features
One-piece construction from a solid billet of aerospace-quality aluminum rather than cast or welded, for even thickness and strength across the caliper block.
The outer section shifts slightly as needed for better self-centering in the caliper, lowering brake drag and boosting performance through more even application.
Calipers, floating brake discs, SC5 street pads, owner's manual, and all required hardware come standard.
CNC-machined carbon steel brackets let the larger calipers bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
DOT-compliant stainless braided lines stop expansion under pressure for quicker response and a firmer pedal than stock rubber lines.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Application details
Choices for this kit
Cross-drilled rotors suit daily driving; slotted rotors suit track use. Each is a separate part number.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requests