Drilled kit image for BKIN300-437COSpecial order · Estimated lead time: typically 2-4 weeks
14-18 Infiniti Q70 – Rear 4 Piston Big Brake Kit w/ 13 in. Drilled Rotors - Supercomp
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Two 4-piston Supercomp calipers (rear axle)
- Two 13 in two-piece cross-drilled rotors with aluminum center bells
- SC5 street brake pads
- Stainless-steel braided brake lines
- CNC-machined caliper mounting brackets and hardware
One approved application: 2014–2018 Infiniti Q70 · RWD
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKIN300-437CO
Product details
The Supercomp rear kit for the 2014-2018 Infiniti Q70 RWD uses forged one-piece four-piston calipers that clamp two 330 mm two-piece cross-drilled rotors. Aluminum center bells sit in the rotor assembly, and the design suits a rear-drive sedan that is driven on the road as a daily car.
This 13 in drilled Supercomp rear system for the Q70 RWD uses forged four-piston calipers and braided lines, with SC5 street pads, aluminum center bells and CNC-machined brackets in the box. The M56 and M37 in the Y51 chassis are also listed.
Clear the rim before the rotors go on: the planning figure is 17 in or larger with about 4 in over the rotor. Measure the barrel and spokes with the KSport template, then note that the parking brake does not work once the rear kit is fitted.
Supported features
One-piece construction from a solid billet of aerospace-quality aluminum rather than cast or welded, for even thickness and strength across the caliper block.
The outer section shifts slightly as needed for better self-centering in the caliper, lowering brake drag and boosting performance through more even application.
Calipers, floating brake discs, SC5 street pads, owner's manual, and all required hardware come standard.
CNC-machined carbon steel brackets let the larger calipers bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
DOT-compliant stainless braided lines stop expansion under pressure for quicker response and a firmer pedal than stock rubber lines.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Compatible applications (3)
Choices for this kit
This part number ships with cross-drilled rotors. Cross-drilled runs cooler and suits daily driving; the slotted version of this kit suits track use. Both versions are listed on the Supercomp page.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN BKIN300-437CO
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.