Air Suspension category referenceSpecial order · Estimated lead time: typically 2-4 weeks
13-18 Infiniti Q70 - Airtech Basic Air Suspension
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four application-specific air struts with 36-way damping and adjustable lower mounts
- Viair 444C compressor
- 5-gallon black steel air tank
- Manual paddle valves and a dual-needle 200 psi front/rear gauge
- All hoses, wiring and installation manuals
- Damping adjustment knob
One approved application: 2013–2018 Infiniti Q70 · Y51 · RWD
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — CIN300-ABA
Product details
The Airtech Basic kit for the 2013 to 2018 Infiniti Q70 in rear-wheel drive is CIN300-ABA. Four application-specific air struts carry 36-way damping, and a Viair 444C compressor, a 5-gallon black steel tank and manual paddle valves complete the kit.
Paddle valves control the front and rear bags, and the dual-needle gauge rated at 200 psi keeps pressure in view. High-quality air bags are fitted, and adjustable lower mounts let you set ride height at any pressure. The gauge and valves are the only control points on this level. Camber-adjustable top mounts can be added on certain MacPherson applications. The 2011 and 2012 Infiniti M37 and M56 are also listed, so check the Q70 model year and body with the fit checker before you order. The Basic level is the entry point for the Q70 and the one to choose when a gauge and valves suit the driving.
Supported features
36 levels of damping adjustment let you dial in the air struts. Insert the included damping knob and turn softer (counterclockwise) or stiffer (clockwise).
Air bags are engineered to match the vehicle. Sleeve-type and double-bellow bags are used depending on the OEM suspension design.
Like KSport coilovers, the struts allow fine-tuning of ride height at any pressure through an adjustable lower mount.
Chosen for reliability and performance; the single 444C can raise the car from lowest to maximum height in as little as four seconds. Airtech Basic and Deluxe raise in 4–7 seconds; Pro Plus and Executive raise faster, in 2–5 seconds.
Paddle valves control front and rear bags; the dual-needle gauge mounts beside the switches so pressure is always visible.
Camber-adjustable top mounts can be added on certain MacPherson-strut applications.
Compatible applications (3)
Choices for this system
Basic (paddle valves and gauge), Deluxe (electronic switches and remote), Pro Plus (OLED remote, four-corner control) and Executive (adds height sensors and auto-leveling) are separate part numbers for this vehicle; compare them on the Air Suspension page.
Available on certain MacPherson-strut applications; ask a technician whether they apply to this vehicle.
Installation
Bolt-on struts with supplied hoses, wiring and manuals; professional installation is recommended. Recheck the system after the first 500 miles or one month; to check for leaks, inflate to 70 psi and spray each fitting with soapy water.
Air suspension setup and careWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim.
Warranty terms and service requestsOther published pages for MPN CIN300-ABA
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.