Drilled rotor style referenceSpecial order · Estimated lead time: typically 2-4 weeks
11-12 Infiniti M56 - Rear 4 Piston Big Brake Kit w/ 13 in. Drilled Rotors - Dualcomp
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Two 4-piston Dualcomp calipers (rear axle)
- Two 13 in two-piece cross-drilled rotors with aluminum center bells
- street brake pads
- Stainless-steel braided brake lines
- CNC-machined caliper mounting brackets and hardware
- Hydraulic handbrake caliper circuit (see the series page)
One approved application: 2011–2012 Infiniti M56 · Y51 · RWD and AWD including sport model
Choose an available option for each required item to enable Add to cart: Choose Caliper Color, Street or Race Pads, Center Bell Upgrades. Options marked “Contact for quote” require a KSport quote and cannot be added directly.
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — BKIN300-435CO
Product details
The Dualcomp rear kit for the 2011-2012 Infiniti M56 in the Y51 chassis clamps two 13 in two-piece cross-drilled rotors with four-piston billet aluminum calipers. Aluminum center bells are part of the rotor assembly, and the cross-drilled faces help the rotors run cooler on a large sedan that is driven every day. Cross-drilled faces also help heat leave the rotor during everyday driving.
Cross-drilled 330 mm rotors take four-piston billet calipers in this Dualcomp rear set for the Y51 M56. The package has braided lines, caliper brackets and hardware, and the M37 and Q70 are also listed.
Measure your rim room first, since 17 in or larger is the working figure for this rotor size. Use the KSport template against your barrel and spokes, and remember that the factory handbrake will not operate after the kit is in place.
Supported features
Two pistons serve the foot brake and two serve the handbrake, each running independently on its own system.
Extremely lightweight two-piece rotors — commonly up to 50% lighter than OEM rotors of the same size.
A polished titanium handbrake cylinder and lever for feel, appearance, and control.
CNC-machined carbon steel brackets let the larger caliper bolt to the OEM caliper bracket location.
Cross-drilled rotors run cooler for daily-driven vehicles; slotted rotors are recommended for more track use.
Standard painted orange, red, black, and yellow; premium high-polish silver, gold, and titanium; glassy and hard-anodized finishes; over 20,000 custom colors on request.
Compatible applications (3)
Choices for this kit
This part number ships with cross-drilled rotors. Cross-drilled runs cooler and suits daily driving; the slotted version of this kit suits track use. Both versions are listed on the Dualcomp page.
Painted KSport orange, race red, caution yellow or jet black at no extra charge. Premium high-polish, glassy and hard-anodized finishes cost extra.
Street pads are standard; race pads, titanium or twin-colour anodized center bells are optional upgrades.
Choose the caliper finish, pads and center-bell configuration above. Every selection and any extra charge is shown before Add to Cart and saved with the order. Contact KSport for a custom color quote.
Installation
Bolt-on installation with the supplied brackets; no vehicle modification on most applications. After fitting, bed the pads in: on a clear road, ten light-to-medium stops from 30–45 mph, three seconds each, at least a quarter mile apart. Some noise before the brakes warm up is normal for big brake kits.
Brake system support and bed-in procedureWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. Small surface cracks on cross-drilled rotors are normal wear and not a defect. Replacement pads, rotors, lines and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN BKIN300-435CO
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.