Kontrol Pro series reference09-13 Infiniti FX37 - Kontrol Pro Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 16 kg/mm front and 14 kg/mm rear
One approved application: 2009–2013 Infiniti FX37 · V35 · AWD
- Ships from Mesa, AZ
- 12-month limited warranty
Specifications — CIN060-KP
Product details
The Kontrol Pro coilover for the 2009 to 2013 Infiniti FX37 (V35, all-wheel drive) is CIN060-KP. Four assembled units are sprung at 16 kg/mm front and 14 kg/mm rear, with 36 damping levels on one knob per damper.
The dampers are monotube, high-pressure units with a body that resists aeration and cavitation, and the front pillowball mounts carry camber adjustment. Adjustable lower mounts hold shock travel while the height is set, and the rear uses a true coilover arrangement. Aerospace-grade 6061-T6 aluminum goes into the mounts, collars and spring perches. The FX35 in AWD form is also listed. Verify the year and drivetrain with the checker before ordering. The coilover is sold as a set, and each unit is rebuildable, with replacement shocks and springs sold separately. The mounts are aerospace-grade and the collars are machined for a precise fit.
Supported features
Every KSport coilover offers 36 levels of damping adjustment. Set full soft for comfortable daily driving, or firm up the compression and rebound for the track.
Applications with a pillowball upper mount often include camber adjustment — useful for dialing in alignment after lowering, and it removes the need for a separate camber kit.
Applications for MacPherson-strut suspension typically use a pillowball upper mount. The bearing design resists the noise common to other coilovers, and steering feel and response improve.
Most Kontrol Pro applications adjust ride height independently of shock and spring travel, so you can set your stance without risking bottoming out the shock.
Oil and gas stay separated within the cylinder. Compared with twin-tube construction, a monotube design dissipates heat faster and more evenly, allows finer damping adjustment, and resists aeration and cavitation.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum for a lightweight, durable, corrosion-resistant build. Steel shock bodies are zinc-plated for added protection from corrosion.
A dust boot is standard on every Kontrol Pro coilover to protect the damper seal, with the bump stop integrated inside it — more efficient, and less prone to crumbling than a separate bump stop.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CIN060-KP
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.