Air Suspension category referenceSpecial order · Estimated lead time: typically 2-4 weeks
92-01 Honda Prelude - Airtech Pro Plus Air Suspension
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four application-specific air struts with 36-way damping and adjustable lower mounts
- Viair 444C compressor and air tank
- Digital manifold with full-colour OLED remote — four-corner independent control, no switches or gauges to wire
- All hoses, wiring and installation manuals
- Damping adjustment knob
One approved application: 1992–2001 Honda Prelude · BB1
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-4 weeks
Specifications — CHD180-APP
Product details
One remote, four corners and no switch panel: that describes the Pro Plus Airtech system for the 1997 to 2001 Honda Prelude (BB6). A digital manifold replaces the usual stack of switches and gauges, and a full-colour OLED remote controls each corner independently while showing tank and bag pressure.
For a low-slung Prelude, skipping the switch panel means less wiring to hide and nothing to mount in the cabin. The kit supplies four application-specific struts with 36-way damping and adjustable lower mounts, a Viair 444C compressor, an air tank, all hoses, wiring and installation manuals, and a damping knob. Leveling is automatic and pressure-based, and the page says the single 444C can raise the car from lowest to maximum height in as little as four seconds.
Camber-adjustable top mounts are available on certain MacPherson-strut applications, and a technician can say whether they apply to your car. The earlier Prelude (1992 to 1996, BB1) is listed as compatible for the series, but this part number is tied to the BB6, so verify with the fitment checker. Installation by a professional is recommended.
Supported features
No switches or gauges and no complex wiring. The kit is operated from a single OLED color-screen remote that displays tank and bag pressure at all four corners.
36 levels of damping adjustment on every strut using the included damping knob.
Sleeve-type and double-bellow bags engineered to match the vehicle and its OEM suspension design.
Fine-tune ride height at any pressure through the adjustable lower mount.
The single 444C can raise the car from lowest to maximum height in as little as four seconds.
Available on certain MacPherson-strut applications.
Compatible applications (2)
Choices for this system
Basic (paddle valves and gauge), Deluxe (electronic switches and remote), Pro Plus (OLED remote, four-corner control) and Executive (adds height sensors and auto-leveling) are separate part numbers for this vehicle; compare them on the Air Suspension page.
Available on certain MacPherson-strut applications; ask a technician whether they apply to this vehicle.
Installation
Bolt-on struts with supplied hoses, wiring and manuals; professional installation is recommended. Recheck the system after the first 500 miles or one month; to check for leaks, inflate to 70 psi and spray each fitting with soapy water.
Air suspension setup and careWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim.
Warranty terms and service requestsOther published pages for MPN CHD180-APP
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.