14-15 Honda Civic Si Coilovers - Kontrol Pro
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 7.5 kg/mm front and 7 kg/mm rear
One approved application: 2014–2015 Honda Civic Si · Si Only
- Ships from Mesa, AZ
- 12-month limited warranty
Specifications — CHD361-KP
Product details
The Si-only fitment here, 2014 to 2015 Honda Civic Si, makes CHD361-KP a focused answer to a common question: how do you improve a good front-drive coupe without wrecking its manners? Kontrol Pro keeps the ride adjustable, with 36 clicks of damping per strut.
Springs measure 7.5 kg/mm at the front and 7 kg/mm at the rear, a close pairing that suits a balanced car. Think of the damper knob as your day-to-day control: full soft for rough roads, firmer for a track. Ride height is set separately at the adjustable lower mount, and the pillowball top mount supports camber adjustment, so alignment can be reset to suit your wheels and tires.
The set includes four assembled coilovers, the top mounts, damping knobs and spanner wrenches. Because the application detail is Si only, do not assume other Civic trims are included. The 2016 to 2017 Acura ILX is listed alongside it. A professional setup and alignment is required after installation, and the year/make/model checker is the place to verify fitment.
Supported features
Every KSport coilover offers 36 levels of damping adjustment. Set full soft for comfortable daily driving, or firm up the compression and rebound for the track.
Applications with a pillowball upper mount often include camber adjustment — useful for dialing in alignment after lowering, and it removes the need for a separate camber kit.
Applications for MacPherson-strut suspension typically use a pillowball upper mount. The bearing design resists the noise common to other coilovers, and steering feel and response improve.
Most Kontrol Pro applications adjust ride height independently of shock and spring travel, so you can set your stance without risking bottoming out the shock.
Oil and gas stay separated within the cylinder. Compared with twin-tube construction, a monotube design dissipates heat faster and more evenly, allows finer damping adjustment, and resists aeration and cavitation.
Mounts, collars, and spring perches are machined from 6061-T6 billet aluminum for a lightweight, durable, corrosion-resistant build. Steel shock bodies are zinc-plated for added protection from corrosion.
A dust boot is standard on every Kontrol Pro coilover to protect the damper seal, with the bump stop integrated inside it — more efficient, and less prone to crumbling than a separate bump stop.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CHD361-KP
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.