Kontrol Plus 2 Way series referenceSpecial order · Estimated lead time: typically 2-3 weeks
11-17 Ford Fiesta - Kontrol Plus 2-Way Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CMZ260-P2
Product details
The Kontrol Plus 2-Way coilovers suit the 2011 to 2017 Ford Fiesta, and the Mazda 2 of 2010 to 2014 is also listed. The set uses application-specific rates, and these systems run 2 to 3 kg stiffer springs with 60 to 150% stiffer damping than the Kontrol Pro kit. Use the year, make and model checker to check your car first.
Two adjustments are offered here: 36 damping levels at the top of each damper and 24 nitrogen levels at the base of the reservoir. Through the external reservoir they make up to 864 possible settings, and the monotube body sheds heat faster and more evenly.
Advanced pillowball mounts on MacPherson-strut applications offer camber and caster adjustment and replace the stock rubber or plastic units. Set the stance at the adjustable lower mount, where most applications keep suspension travel intact, and have the car aligned professionally afterward.
Supported features
36 levels of damping adjustment at the top of the assembly, plus an additional 24 levels of nitrogen adjustment at the bottom of the reservoir.
Kontrol Plus 2-Way systems run 2–3 kg stiffer spring rates and 60–150% stiffer damping than the Kontrol Pro kit.
Standard external reservoirs allow rebound, compression, and nitrogen pressure to be adjusted independently — 864 possible settings.
Oil and gas stay separated within the cylinder for faster, more even heat dissipation, finer damping adjustment, and resistance to aeration and cavitation.
Standard on MacPherson-strut applications: camber and caster adjustable mounts that replace the stock rubber or plastic mounts to reduce flex and improve response.
Most applications adjust ride height without affecting shock and spring travel, so you can set your stance without bottoming out the shock.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CMZ260-P2
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.