Asphalt Rally Spec AR series referenceSpecial order · Estimated lead time: typically 2-3 weeks
03-05 Dodge Neon SRT-4 - Asphalt Rally Spec AR Coilovers
Choose year, make and model to confirm this application-specific product fits — you can add it to your cart either way.
Verify fitment- Four assembled coilovers, sprung and valved for this application
- Upper mounts (pillowball with camber adjustment on MacPherson-strut fronts)
- Damping adjustment knobs and spanner wrenches
- Front and rear springs rated 8.7 kg/mm front and 7.2 kg/mm rear
- Ships from Mesa, AZ
- 12-month limited warranty
- Special order: typically 2-3 weeks
Specifications — CDG030-AR
Product details
Here is the firmer alternative for the 2003 to 2005 Dodge Neon SRT-4: Asphalt Rally Spec AR, part number CDG030-AR. Springs are rated 8.7 kg/mm at the front and 7.2 kg/mm at the rear, and the dampers use an inverted layout.
Those inverted shocks use 55 mm bodies with extra oil capacity, built for sustained stage loads, and they keep heat away from the knuckle and brakes. An extended stroke supports more travel on pavement that is less than smooth. Heavy-duty steel mounts and hardened rubber pillowball top mounts on MacPherson fronts keep response crisp, and ride height is set at the adjustable lower mount. Damping across 36 settings means the stiffness is still yours to choose.
Included are four assembled coilovers, knobs and spanner wrenches. The compatible list also names the 2000 to 2005 Neon. Do check your year and trim with the year/make/model checker before ordering, and plan on a professional alignment once the car is lowered and settled.
Supported features
Gravel Rally springs range from 250 mm to 270 mm with extended cylinder length and piston stroke, greatly improving handling over uneven and bumpy roads. Height range varies per vehicle and does not exceed OE ride height.
Asphalt Rally uses inverted shocks on many MacPherson applications, moving the gas/oil chamber away from the knuckle and brakes to reduce heat transfer and unsprung weight.
Strengthened steel lower mounts are standard on MacPherson applications; Gravel Rally adds heavy-duty steel upper mounts on most applications. Wishbone and multi-link applications use the standard aluminum mounts.
Gravel Rally kits use unique hardened-rubber pillowball top mounts on MacPherson applications to absorb repeated impacts from loose surfaces.
Simultaneous compression and rebound adjustment across 36 levels, with carefully selected per-application spring rates and damping to stabilize the car over uneven roads.
Inverted applications use 55 mm bodies for added oil capacity and cooling under sustained stage loads.
Compatible applications (2)
Installation
Set ride height with the adjustable lower mount where the application has one; use the spring perch only where the application-specific layout has no adjustable lower mount. Lock every collar with both spanner wrenches. Start damping 18 clicks counterclockwise from full stiff and adjust from there. Professional setup and alignment are required after installation; on MacPherson fronts, establish baseline camber at the elongated lower-mount hole before fine adjustment at the upper plate.
Coilover setup, height and damping guidesWarranty & service
12-month limited warranty to the original purchaser against defects in materials and workmanship. Racing use, exterior finish and improperly installed or modified parts are not covered; keep your original invoice for any claim. KSport coilovers are rebuildable; replacement shocks, springs, mounts and hardware are sold individually.
Warranty terms and service requestsOther published pages for MPN CDG030-AR
These page names share this MPN; they do not confirm fitment. Verify your vehicle before ordering.