Mitsubishi / model guide
Mitsubishi Evolution Parts & Fitment Guide
Build around your chassis.
Explore suspension and brake systems for your Mitsubishi Evolution.
Find parts for your year Read the suspension & brake guide
The Evolution page is the narrowest in the catalog: one listing, an Advanced Pillowball Mount, and no coilovers, air suspension or brake kits shown. If you are looking for that mount specifically, you are in the right place. There is not much to compare, which makes the page quick to read.
A pillowball mount replaces a rubber suspension mount with a spherical bearing, which keeps the suspension location more precise. That tends to suit track and spirited driving more than commuting, since you can expect more feedback from the chassis. Mounts like this are usually part of a larger suspension project, so consider what else you are changing. Check the listing to see how it is used.
The picker shows only 2016. Select it to confirm that the mount applies to your car, and read the product title closely, which refers to the Evolution X. Before ordering, make sure the part is what you are looking for and that you have the tools or a shop to handle installation. If you need more than this one part, browse other pages.
Start with fitment
Choose your year
See the parts listed for your Evolution.
Available for Evolution
Build around your vehicle.
Browse the systems below. Select your year to narrow the application before ordering.
Every listed application
All Mitsubishi Evolution parts
1 product listed for the Mitsubishi Evolution across every recorded year.
Vehicle guide
Mitsubishi Evolution Parts & Fitment Guide
The exact catalog match on this Mitsubishi Evolution route is one Advanced Pillowball Mount, part number/MPN PBMT250-A, listed for 2016 Mitsubishi Evolution X. This application is limited to the product record shown below. The mount is an individual suspension component; it is not a complete coilover system or a general fitment statement for every Evolution generation.
Match the listed application
Confirm that the vehicle is a 2016 Evolution X and compare its existing mount and suspension configuration with the linked product details. Do not select this item for another year or Evolution generation based only on the route name. If the installed part number is not visible, record the vehicle year and configuration and photograph the mount and attachment points before contacting support.
Understand the mount type
A pillowball mount uses a spherical bearing that allows articulation at the mount. The term describes the bearing type; it does not by itself specify adjustment range, included hardware, or the behavior of a complete suspension setup. Review the item page for the exact features and components supplied. Confirm whether the mount matches the coilover or strut assembly already on the vehicle before ordering.
Choose the right scope of work
If the job is to replace a mount, compare PBMT250-A with the installed component and the suspension manufacturer's instructions. If the job is a complete spring-and-damper replacement, choose a coilover kit through its own product listing with an explicitly matching application. A mount listing does not establish that a separate full kit fits. When changing both, have the installer verify the mount and suspension as a combination before disassembly.
Installation and follow-up
Suspension mounts connect loaded components and may require specialized tools. Use a qualified installer if you do not have the equipment and experience to support the vehicle and handle the assembly safely. Follow the instructions supplied for this exact part, inspect related hardware during reassembly, and ask whether alignment is appropriate after the work. Address new noise, binding, or uneven tire contact promptly.
For a fitment question, share the 2016 model year, Evolution X configuration, installed suspension details, and PBMT250-A part number. This keeps the check tied to the sole listed application and helps distinguish a component replacement from a complete-system selection.
Catalog matches for Mitsubishi Evolution
Parts and accessories
- 16-16 Mitsubishi Evolution X - Advanced Pillowball Mount — part number/MPN PBMT250-A; listed application: 2016.
Setup and support
For fitment help, contact KSport with the vehicle year and part number. See coilover system support.
Frequently asked questions
What application is listed?
2016 Mitsubishi Evolution X for part number/MPN PBMT250-A.
Is PBMT250-A a complete coilover kit?
No. It is an individual pillowball mount. Choose a complete system from its own product listing and verify that application's fitment.
What details should I provide for help?
Share the model year, Evolution X configuration, installed suspension details, and PBMT250-A.
Application guide
Choose by exact vehicle.
Model names can span different chassis and equipment. Check the year, application notes and part number together. Suspension mounting arrangements and brake dimensions can differ between applications.
Get application helpApplication support
Build with the right fit.
Have your year, model and part number ready. We’ll help with the details.