Audi S5 Quattro Parts & Fitment Guide

Vehicle guide

Audi S5 Quattro Parts & Fitment Guide

The catalog lists one focused component for the Audi S5 Quattro: the Electronic Damping Cancellation Kit, part number/MPN EDCAU350. Its fitment is 2008–2015 (B8). This is a cancellation component associated with a suspension change where electronic damper adjustment is removed; it does not provide electronic damper adjustment. The route does not list a complete coilover system for this application.

Confirm the vehicle application

Check the year and B8 chassis detail against the exact product line. Compare EDCAU350 with the installed component if replacing an existing part. A shared S5 name is not enough when the car has a different chassis or prior suspension changes. If the old part cannot be identified, record the vehicle details and photograph its connectors and mounting location before contacting support.

Check what the cancellation kit includes

Read the product page for the exact contents, connection arrangement, and installation steps. Do not assume that a cancellation component includes replacement dampers or other suspension hardware. If the suspension is being changed at the same time, confirm that the component is intended for the specific replacement setup before ordering. Keep the instructions available to the installer.

Plan the installation

Record the current suspension configuration and any previous changes. Handle electrical connectors carefully and route them as directed, clear of moving or hot parts. Use a qualified technician if the installation involves unfamiliar wiring or suspension removal. Follow the product's sequence rather than relying on a generic procedure for another vehicle.

Check the result

After installation, inspect the connection and surrounding hardware and complete any checks specified by the product instructions. If a warning or unexpected behavior remains, recheck the vehicle configuration and installation with a qualified technician. For support, provide the year, B8 chassis, installed suspension details, and EDCAU350 part number so the question stays tied to this exact S5 application.

Coordinate a suspension conversion

Before selecting replacement dampers or springs, note which factory electronic functions remain connected and which parts the new setup replaces. Compare that plan with the cancellation kit instructions and the replacement system's own application. Have the installer review both products together when the change affects multiple suspension components. This avoids treating the cancellation part as a substitute for the mechanical suspension pieces themselves.

Catalog matches for Audi S5 Quattro

Parts and accessories

• 2008-2015 Audi S5 Quattro - Electronic Damping Cancellation Kit — part number/MPN EDCAU350; listed application: 2008–2015 (B8).

Setup and support

For fitment help, contact KSport with the vehicle year and part number. See coilover system support.

Frequently asked questions

What is listed for this vehicle?

Electronic Damping Cancellation Kit, part number/MPN EDCAU350, for 2008–2015 (B8).

Is this a complete suspension kit?

No. It is an individual component. Select a complete system from its own product listing and verify that item's application.

What should I provide for fitment help?

Share the vehicle year, chassis or configuration where available, installed suspension details, and the part number.